Router problems

The geek forum. PHP, Perl, HTML, hardware questions etc.. it's all in here. Got a techie question? We'll sort you out. Ask your questions or post a link to your own site here!

Router problems

Postby SnoringFrog » Wed Aug 12, 2009 9:11 am

Ok, so last night we had a storm and the internet went out. It's happened before; we normally just wait a while then reset the modem and the router and everything goes back to normal, but that hasn't worked this time.

I found out that if I bypass the router and just plug the modem into the computer it works fine, but as soon as I switch back to include the router in the loop, I lose internet again. I've tried switching without turning either off; turning one or both of them off (in both orders); and turning off the modem, the router, and the computer and restarting everything in various orders but nothing has worked. Once, when I plugged everything in the way it was originally, the icon in my system tray got as far as "acquiring network..." something (forgot the last word, I'll try to go repeat that and get that full phrase after I post this), but that's as far as it got before it stopped.

Does anyone know anything I should try that I might be missing or should check that would cause this problem?

My router is a Linksys wrt54g, and I'm using WinXP.
UC Pseudonym wrote:For a while I wasn't sure how to answer this, and then I thought "What would Batman do?" Excuse me while I find a warehouse with a skylight...
[SIZE="7"][color="MediumTurquoise"]Cobalt Figure 8[/color][/SIZE]
DeviantArt || Myspace || Facebook || Greasemonkey Scripts || Stylish Userstyles
User avatar
SnoringFrog
 
Posts: 1159
Joined: Tue Jul 26, 2005 9:25 pm
Location: Liberty University, VA

Postby Kaligraphic » Wed Aug 12, 2009 3:40 pm

It sounds like you're using wireless, and either failing to correctly associate with the network, or failing to acquire an IP address from the router.

I'd suggest you note your settings and just do a complete reset of the router (the reset button is usually on the back) and set it up again. If you haven't changed from the stock firmware, that should be pretty fast and easy.
The cake used to be a lie like you, but then it took a portal to the deception core.
User avatar
Kaligraphic
 
Posts: 2002
Joined: Wed Jul 21, 2004 12:00 pm
Location: The catbox of DOOM!

Postby Whitefang » Thu Aug 13, 2009 7:05 am

I highly suspect that your router is, sadly, broken. I am also assuming that you are mainly using wireless.

If you have the capability, try to plug your computer via ethernet cable into your router. Try every port. If you get a connection, your wireless is probably broken. If you get no connection, your router is completely broken. It looks like you'll have to get a new router either way.
"It's not easy to act in the name of justice."

"Justice is not the only right in this world"
User avatar
Whitefang
 
Posts: 261
Joined: Wed Nov 19, 2008 9:17 pm
Location: Paradise

Postby SnoringFrog » Thu Aug 13, 2009 9:52 am

As far as our computer goes, we don't use the wireless. It's always been plugged into the router. When I get to where I can access the router options again (I had it, then switched cords around and lost it, and I don't remember what I did to get it in the first place lol), I'm going to reset to defaults and give it another go. If that fails, then I guess I'm going to have to get another router...bleh.
UC Pseudonym wrote:For a while I wasn't sure how to answer this, and then I thought "What would Batman do?" Excuse me while I find a warehouse with a skylight...
[SIZE="7"][color="MediumTurquoise"]Cobalt Figure 8[/color][/SIZE]
DeviantArt || Myspace || Facebook || Greasemonkey Scripts || Stylish Userstyles
User avatar
SnoringFrog
 
Posts: 1159
Joined: Tue Jul 26, 2005 9:25 pm
Location: Liberty University, VA

Postby Whitefang » Thu Aug 13, 2009 7:25 pm

Type into a web browser 192.168.1.1 and hit enter. This will probably take you to the router's setup pages.

If it asks for a password and you've never set it up, the user name is probably admin and the password is probably admin.

In this panel, I would try to reset the DHCP address/protocol (Most likely a button labeled DHCP Renew). Make sure that the router thinks it's connected to the internet.
"It's not easy to act in the name of justice."

"Justice is not the only right in this world"
User avatar
Whitefang
 
Posts: 261
Joined: Wed Nov 19, 2008 9:17 pm
Location: Paradise

Postby SnoringFrog » Thu Aug 13, 2009 9:18 pm

Yes, that normally does, but when I started rearranging cords I ended up never being able to get them back the right way so that it would let me access that. I think it has to do with forgetting to reset the modem when I moved the cords around.

We have another router now that our neighbor just gave us, but when my dad tried setting it up it kept failing. Something with the IP address, I'm not sure because I wasn't in here and haven't taken the time to try setting it up myself yet. I'll probably do that tomorrow evening.
UC Pseudonym wrote:For a while I wasn't sure how to answer this, and then I thought "What would Batman do?" Excuse me while I find a warehouse with a skylight...
[SIZE="7"][color="MediumTurquoise"]Cobalt Figure 8[/color][/SIZE]
DeviantArt || Myspace || Facebook || Greasemonkey Scripts || Stylish Userstyles
User avatar
SnoringFrog
 
Posts: 1159
Joined: Tue Jul 26, 2005 9:25 pm
Location: Liberty University, VA


Return to Computing and Links

Who is online

Users browsing this forum: No registered users and 96 guests